你好,欢迎来到阿里巴巴外贸圈 注册 登出
sanzo
外贸新生
外贸新生
  • 用户名sanzo
  • 粉丝6
  • 发帖数28
  • 铜币4枚
  • 威望-2点
  • 社区居民
  • 忠实会员
阅读:150回复:0

About quality

楼主#
更多 发布于:2019-02-01 14:09

图片:上卓logo.png



                                                      --Certification of Sanzo--
                                                                     Professional Supplier




Common quality standard:

1. Diameter(top rim): TOL%+/-2mm
2. Height TOL%+/- 1.5mm
3. Width in the middle: TOL%+/-1mm
4. Wall thickness:TOL%+/-1mm
5. Weight: TOL% 10%

Class standard
1. Super
Body: From the mouth within 20mm is not allowed to have any bubbles and hemp dot, one 1mm-diameter bubble and unconspicuous 1 stripe are allowed below the 20mm.
Note: In all these issues, only one kind can exist on the cup.
Stick: Don’t allow any bubbles and impurities.
Bottom: One 1mm-diameter bubbles is allowed.

2. Class A
Body: From the mouth within 20mm is allowed to have one 0.8mm-diameter bubble, one 1.2mm- diameter bubble and unobvious 1 strip are allowed below the 20mm.
Note: In all these issues, only one kind can exist on the cup, 2-3 no-dense dots are allowed.
Stick: One 2mm-diameter bubble is allowed to exist.
Bottom: One 2mm-diameter bubble is allowed to exist.

3. Class B
Body: From the mouth within 20mm is allowed to have one 1.2mm-diameter bubble, one 1.5mm- diameter bubble and unobvious 1 strip are allowed below the 20mm. 3-4 no-dense dots are allowed below 20mm.
Stick: One 3mm-diameter bubble is allowed.
Bottom: One 2mm-diameter bubble is allowed.

4. Class C
Body: From the mouth within 20mm is allowed to have one 1.5mm-diameter bubble, two 1.5mm- diameter bubble and unobvious 2 strip are allowed, but they can not be intersected and bubble dots can’t get together in unity surface below 20mm. 3-4 no-dense dots are allowed below 20mm.
Stick: One 5mm-diameter bubble is allowed.
Bottom: One 2.5mm-diameter bubble is allowed.
喜欢0 评分0
游客